Chrysler · 1962–1963
Chrysler SV1 Valiant
The Chrysler Valiant (SV1) is an automobile which was produced in Australia from March 1962 to April 1963 by Chrysler Australia. It was the second Australian Chrysler Valiant model, replacing the RV1 (R series)
Text from Wikipedia (CC BY-SA 4.0).
Successor: Chrysler AP5 Valiant
All Chrysler SV1 Valiant data: UK builds, safety, recalls, model years →
Changes
The SV1 Valiant (or "S Series" ) was introduced in March 1962, replacing the Chrysler Valiant (RV1)—also known as the "R Series"—only ten weeks after the release of its predecessor. Like the RV1 it was essentially a US design just assembled in Australia. It was an evolution of the previous model, featuring a revised radiator grille treatment with the name "Valiant" at the top. The boot lid no longer included a non-functional spare wheel moulding and round tail-lights replaced the previous oblong units. Mechanical changes included larger brakes, increased fuel tank capacity and a corrosion-resistant exhaust muffler. A steering-column mounted gearshift replaced the floor-mounted shifter, however cars fitted with the automatic transmission option retained push-putton controls.
Model range
The Valiant SV1 was produced in two models: Valiant SV1-2 manual sedanValiant SV1-4 automatic sedan The SV1 was offered only in 4 door sedan form. Like its predecessor, the SV1 was marketed as Valiant by Chrysler rather than as Chrysler Valiant.
Engines and transmissions
The SV1 Valiant was offered only with the, 225-cubic-inch (3.7 L) capacity inline, Slant-6 engine with a choice of three-speed manual transmission or three-speed TorqueFlite automatic transmission.
Production and replacement
Some 10,009 SV1 Valiants were built prior to its replacement by the Chrysler AP5 Valiant in May 1963. 4,513 of these were SV1-2 manual sedans and 5,496 were SV1-4 automatic sedans. New Zealand production The SV1 was exported to New Zealand in 1963 and then assembled locally from knockdown kits from 1964 by Todd Motors in Petone, Wellington.
Sections adapted from Wikipedia (CC BY-SA 4.0); text is shortened. Read the full article for the complete history and citations.
Specifications
- name
- Chrysler Valiant (SV1)
- Manufacturer
- Chrysler Australia
- aka
- Plymouth Valiant
- Production
- March 1962 – April 1963
- Assembly
- Australia: Mile End, South Australia
- Body style
- 4-door sedan
- Layout
- FR layout
- Engine
- 225 cuin I6
- Transmission
- 3-speed manual, 3-speed automatic
- Wheelbase
- 106.5 in
- Length
- 183.7 in
- Width
- 70.4 in
- Height
- 56.7 in
- Kerb weight
- 2704 lb
- Predecessor
- Chrysler Valiant (RV1)
- Successor
- Chrysler Valiant (AP5)
- Platform
- Chrysler A platform
- Related
- Plymouth Valiant
- sp
- uk
- Top speed
- 160 km/h
Specification summary from Wikipedia (CC BY-SA 4.0). Measured facts from Wikidata (CC0). Check the linked sources for citations.
More photos
Sources
- Wikidata — https://www.wikidata.org/wiki/Q5114684CC0 1.0 · retrieved 2026-10-01
- Wikipedia — https://en.wikipedia.org/wiki/Chrysler_Valiant_(SV1)CC BY-SA 4.0 · Text © Wikipedia contributors; revision 1357528264 · retrieved 2026-10-01
- Wikimedia Commons — https://commons.wikimedia.org/wiki/File:1962_Chrysler_Valiant_(SV1)_sedan_(25009622274).jpgCC BY 2.0 · Photo: Jeremy from Sydney, Australia · retrieved 2026-10-01
- Car Model Index — https://models.autoculturesociety.com/Compiled record. Sources that do not permit reuse are not copied; this index is credited instead.
