Porsche · 1966–1967
Porsche 910
The Porsche 910 or Carrera 10 are prototype race cars built by Porsche in late 1966 and early 1967 as less restricted evolutions of the "mass produced" (65 in total) street legal 2 litre Porsche 906 Carrera 6 that were made in early 1966 to FIA Group 4 Sportscar homologation requirements that included luggage space and spare wheel. Unlike the 906, that also had carried over Porsche 904 parts, the 910 was not developed with the considerations necessary for FIA/CSI homologation, public road use, racing by customers, or economy in general. The chassis is a steel space frame design covered by a lightweight fiberglass body, fitted with up to date Formula 1 suspensions parts, wheels, tyres, different engines, and bodies. As the 906 had gullwing doors with hinges on the roof that had issues with remaining properly closed, the 910 doors hinged forward, which also allowed that the roof could be removed. The 910s were optimized for various use cases, as regular 906-like short tail (Kurzheck KH) cars, as low weight open top spyders for hillclimbing and twisty courses like Targa Florio and Nürburgring, or with low drag long tail (Langheck LH) coupé bodies for fast tracks like Monza, Spa, Le Mans. Introduced in the summer of 1966 at hillclimbs, the 910 was succeeded at the June 1967 Le Mans 24h by the more aerodynamic Porsche 907 with a smaller cabin in which the driver sits on the right side, as most road race tracks are run clockwise and sitting on the inside of a corner is better for weight distribution and orientation. When the minimum number for sportscars was lowered to 25 for 1969, the over two dozen Porsche 910 prototypes that had been made since 1966 were belatedly homologated in January 1969 as sportscars to let privateers race them for class wins and in minor events. Due to close relation with the 906, additional requirements like luggage space and spare wheel could be met easily.
Text from Wikipedia (CC BY-SA 4.0).
Predecessor: Porsche 906 · Successor: Porsche 907
All Porsche 910 data: UK builds, safety, recalls, model years →
History
The 906 was the forerunner of a whole new generation of Porsche competition machines. The first of these was the 910. Introduced in late 1966, there were two versions; a Spyder, equipped with a 2.0 liter flat 8-cylinder engine, and the Coupe, powered by either a 2.0 liter 901/20 flat 6-cylinder or a 2.2 liter Typ 771 flat 8-cylinder. The windshield was carried over from the 906, but the suspension was changed dramatically. Both the Spyder and the Coupe used a suspension design similar to the Formula One cars of the day, with 13 inch wheels at all four corners. The Spyder, built as a hill climb car, differed from the Coupe in other, minor ways like the use of a two-gallon fuel tank. The body was changed in a number of ways from the 906. Due to the use of 13-inch wheels, the wheel arches could be smaller, allowing a better view out the windshield. The large rear plastic window of the 906 was abandoned, as were its gull wing doors. The 910 doors hinged forward, and the center roof section between could be removed to make it an open cockpit car. Like the 906, the rear body section hinged rearward to allow access to the drivetrain. A total of 28 examples were built. Originally contesting the 2-liter prototype class, when FIA rules were changed allowing a minimum of 25 cars to be produced, the now two year old 910 was nearly automatically qualified as a FIA Group 4 competition sports car. Homologation was granted in January 1969. With the 910 and 906, Porsche completely dominated the 2-liter classes in 1967, and challenged for some overall wins. Outgunned by the larger engined Ford GT40 and Ferrari Prototypes on the long tracks, 910s usually finished in the top five, while handily winning their class. Results in early 1967, like 4th at Daytona followed by 3rd at Sebring and M
Sections adapted from Wikipedia (CC BY-SA 4.0); text is shortened. Read the full article for the complete history and citations.
Specifications
- name
- Porsche 910 Carrera 10
- Manufacturer
- Porsche
- Production
- 1966-1967
- Designer
- Helmuth Bott
- Layout
- Rear mid-engine, rear-wheel-drive layout
- Predecessor
- Porsche 906
- Successor
- Porsche 907
Specification summary from Wikipedia (CC BY-SA 4.0). Measured facts from Wikidata (CC0). Check the linked sources for citations.
More photos
Sources
- Wikidata — https://www.wikidata.org/wiki/Q2001236CC0 1.0 · retrieved 2026-10-01
- Wikipedia — https://en.wikipedia.org/wiki/Porsche_910CC BY-SA 4.0 · Text © Wikipedia contributors; revision 1375658029 · retrieved 2026-10-01
- Wikimedia Commons — https://commons.wikimedia.org/wiki/File:1967_Porsche_910_(cropped).jpgCC BY 2.0 · Photo: Nathan Bittinger, crop & USAF logo removed by anetode · retrieved 2026-10-01
- Car Model Index — https://models.autoculturesociety.com/Compiled record. Sources that do not permit reuse are not copied; this index is credited instead.