Q320140
Brennabor Juwel 8
The Brennabor Juwel 8 is an eight-cylinder automobile introduced the Brennabor company in 1930 to complement their then recently introduced Juwel 6 model. The Juwel 8 was powered by a newly developed 8-cylinder side-valve engine of 3.4 litres, mounted ahead of the driver and delivering 60 hp at 3,200 rpm. Power was delivered to the rear wheels through a single plate dry clutch and a three-speed gear box controlled using a centrally positioned floor-mounted gear stick. The car sat on a U-profile pressed steel chassis with rigid axles and semi-elliptical leaf springing. It was offered as a four-door four-seater sedan/saloon or a four-door “Pullman” sedan/saloon with six seats. The mechanically linked foot brake operated directly on all four wheels, while the handbrake operated on the rear wheels. The last Juwel 8 appears to have been produced in 1932, by when approximately 100 had been built.
Text from Wikipedia (CC BY-SA 4.0).
All Q320140 Brennabor Juwel 8 data: UK builds, safety, recalls, model years →
Technical data
== Sources == • Oswald, Werner: Deutsche Autos 1920–1945, Motorbuch Verlag Stuttgart, 10. Auflage (1996), ISBN 3-87943-519-7
Sections adapted from Wikipedia (CC BY-SA 4.0); text is shortened. Read the full article for the complete history and citations.
Specifications
Measured facts from Wikidata (CC0). Check the linked sources for citations.
Sources
- Wikidata — https://www.wikidata.org/wiki/Q908985CC0 1.0 · retrieved 2026-10-01
- Wikipedia — https://en.wikipedia.org/wiki/Brennabor_Juwel_8CC BY-SA 4.0 · Text © Wikipedia contributors; revision 1154542927 · retrieved 2026-10-01
- Car Model Index — https://models.autoculturesociety.com/Compiled record. Sources that do not permit reuse are not copied; this index is credited instead.